DIN 1142 Wire Rope Clip Malleable, also known as DIN1142 Malleable Wire Rope Clamp.
The body is cast from Malleable iron and the U bolt is stamped from round steel.
It is commonly used in static bolted and rope fastening, such as electric power, communications line, band fastening, etc.
THE COMPONENTS OF DIN 1142 WIRE ROPE CLIPS
The DIN 1142 wire rope clip typically consists of the following components:
1. U-shaped body: This is the main part of the clip, which has a U-shape that wraps around the wire rope.
2. Saddles: The clip usually has two saddles, one on each side of the U-shaped body. These saddles hold the loose end of the wire rope in place when properly installed.
3. Nuts and bolts: The wire rope clip comes with nuts and bolts that secure the saddles to the U-shaped body, effectively clamping the wire rope in place.
| SIZE | DIMENSIONS IN MM | WT/100PCS | ||||||
| (MM) | A | B | C | D | F | E | G | (KGS) |
| 5 | 25 | 13 | 13 | 5 | 13 | 7 | 25 | 2.08 |
| 6.5 | 30 | 14 | 16 | 6 | 17 | 8 | 32 | 4 |
| 8 | 39 | 18 | 20 | 8 | 20 | 10 | 41 | 8.2 |
| 10 | 40 | 21 | 20 | 8 | 24 | 12 | 46 | 9.2 |
| 13 | 55 | 29 | 28 | 12 | 30 | 15 | 64 | 27.5 |
| 16 | 64 | 35 | 32 | 14 | 35 | 18 | 76 | 43 |
| 19 | 68 | 40 | 32 | 14 | 36 | 22 | 83 | 49 |
| 22 | 74 | 44 | 34 | 16 | 40 | 24 | 96 | 68 |
| 26 | 84 | 51 | 38 | 20 | 50 | 26 | 111 | 117 |
| 30 | 95 | 59 | 41 | 20 | 55 | 34 | 127 | 140 |
| 34 | 105 | 67 | 45 | 22 | 60 | 38 | 141 | 213 |
| 40 | 117 | 77 | 49 | 24 | 65 | 44 | 159 | 268 |
NOTE:
Installation of DIN 1142 wire rope clips must follow specific guidelines to ensure a safe and secure termination. Improper installation can lead to failure and potential hazards. Therefore, it’s crucial to adhere to the manufacturer’s recommendations and guidelines provided with the wire rope clip.
Reviews
There are no reviews yet.