Wire Rope Clip DIN 1142 – Malleable Steel, Galvanized
Reliable, Code-Compliant Termination for Light to Medium-Duty Applications

Key Features:

• Malleable Cast Iron Body: Provides good strength and ductility for non-critical applications (not suitable for overhead lifting of personnel or heavy dynamic loads).
• Galvanized Finish: Hot-dip or electro-galvanized coating delivers excellent corrosion resistance for outdoor and humid environments.
• DIN 1142 Compliance: Meets European dimensional and performance standards for wire rope clips, ensuring consistent quality and compatibility.
• Simple Installation: Consists of a U-bolt, saddle, and two nuts for easy assembly and tensioning.
• Permanent Markings: Typically stamped with size and standard reference for identification.

Common Applications:

• Securing guy wires, fencing, and temporary rigging
• Agricultural equipment and light towing setups
• Marine dock lines and non-critical mooring
• General-purpose wire rope end fixings where high fatigue resistance is not required

Safety & Usage Guidelines:

• Not rated for overhead lifting or critical personnel safety applications—use only drop-forged clips (e.g., DIN 741 or Crosby G-450) for such purposes.
• Always install the saddle on the live (load-bearing) end of the rope—“Never saddle a dead horse.”
• Use the correct number of clips per rope diameter (typically 2–3 clips spaced properly).
• Re-tighten nuts after initial load application.
• Inspect regularly for cracking, corrosion, or deformation—malleable iron can fail without warning under shock loads.

For non-critical, static, or light-duty tasks—the DIN 1142 Galvanized Malleable Wire Rope Clip offers dependable performance at an economical price.